Nimbus Technologies

• ZT-20xx-IOG series (referred to as ZT-IOG) is a series of ZigBee wireless communication module with Digital Input and Digital Output channels. The “IOG” in the ZT-IOG is the abbreviation for the I/O Group and means the multi-to-multi Pair-connection I/O modules. The ZT-2043-IOG module is one of the ZT-20xx-IOG series that provides 14 digital output channels. User can easily confi gure it as either a ZigBee Coordinator or a ZigBee Router via the external switches. The ZigBee Coordinator will serve as a message processing and distribution center. In other words, as long as any DI of any ZT-IOG module changes its channel state, it will immediately trigger an event and upload it to the ZigBee Coordinator for I/O updating logic calculations to determine the DO output states of the ZT-IOG system. Then, the ZigBee Coordinator will broadcast a message periodically to all ZT-IOG ZigBee Router modules for synchronizing all DO channel states to achieve the multi-to-multi I/O Pair-connection function

• ISM 2.4 GHz Operating Frequency
• Fully Compliant with 2.4G IEEE 802.15.4 / ZigBee Specifications
• Supports AES-128 Encryption for the Wireless Communication
• Wireless Transmission Range up to 700 m (Default)
• Adjustable RF Transmission Output Power
• Physical Pair-connection Channels of 14 Digital Output
• 280 Logical Pair-connection Channels Supported
• Configurable I/O Pairing Relationship
• DO Safe Value Setting for Wireless Disconnection Monitoring
• Surge and ESD Protection
• DIN-Rail Mounting

• ISM 2.4 GHz Operating Frequency 
• Fully Compliant with 2.4G /ZigBee Specications 
• Wireless Transmission Range up to 700 m
• GUI Conguration Software (Windows Version) 
• 3-wire RTD Input with Lead Resistance Elimination
• Individual Channel Configuration
• Open Wire Detection
• Overvoltage Protection
• DIN-Rail Mounting

• ISM 2.4 GHz Operating Frequency 
• Fully Compliant with 2.4G /ZigBee Speci???cations
• Wireless Transmission Range up to 700 m 
• GUI Conguration Software (Windows Version) 
• 4 PhotoMOS Relay Output Channels and 4 Open Collector Digital Output Channels
• Short Circuit Protection
• Surge and ESD Protection
• Congurable Power-on Value Settings
• Congurable Safe Value Settings 
• DIN-Rail Mountin

• The ZT-2052-IOP module acts as a ZigBee coordinator that provides 8-channel digital input pair-connection function with module of ZT2042 (4-ch PhotoMOS Relay Output and 4-ch Open Collector). An embedded I/O channel binding function means that there is no need to use an external controller. 
• The status of each ZT-2052-IOP channel triggers the corresponding remote digital output channels on the ZT-2042 module. The ZT-2052- IOP continually transmits updates on the status of the digital input channels to the remote ZT-2042 to ensure that the digital output channels are synchronized. 
• The ZT-2052-IOP also provides external DIP and Rotary switches for easy confi guration, which can be used to synchronize the digital signals in any environment where wiring is diffi cult.

• ISM 2.4 GHz Operating Frequency
• Fully Compliant with 2.4G IEEE 802.15.4/ZigBee Specifications
• Wireless Transmission Range up to 700 m (Default)
• Adjustable RF Transmission Output Power
• 8 Channels Pair-connection of the Digital Input
• DO Safe Value setting for Wireless Disconnection Monitoring
• Configurable I/O Pairing Number
• Surge and ESD Protection
• Supports AES-128 Encryption for the Wireless Communication
• DIN-Rail Mountable

Introduction:

• ZT-20xx-IOG series (referred to as ZT-IOG) is a series of ZigBee wireless communication module with Digital Input and Digital Output channels. The “IOG” in the ZT-IOG is the abbreviation for the I/O Group and means the multi-to-multi Pair-connection I/O modules. User can easily configure it as either a ZigBee Coordinator or a ZigBee Router via the external switches. The ZigBee Coordinator will serve as a message processing and distribution centre. In other words, as long as any DI of any ZT-IOG module changes its channel state, it will immediately trigger an event and upload it to the ZigBee Coordinator for I/O updating logic calculations to determine the DO output states of the ZT-IOG system. Then, the ZigBee Coordinator will broadcast a message periodically to all ZT-IOG ZigBee Router modules for synchronizing all DO channel states to achieve the multi-to-multi I/O Pair-connection function.

Features:

• ISM 2.4 GHz Operating Frequency
• Fully Compliant with 2.4G IEEE 802.15.4 / ZigBee Specifications
• Supports AES-128 Encryption for the Wireless Communication
• Wireless Transmission Range up to 700 m (Default)
• Adjustable RF Transmission Output Power
• Physical Pair-connection Channels of 14 Digital Output
• 280 Logical Pair-connection Channels Supported
• Configurable I/O Pairing Relationship
• DO Safe Value Setting for Wireless Disconnection Monitoring
• Surge and ESD Protection
• DIN-Rail Mounting

ZigBee Repeater:

• The ZT-2510 is a ZigBee repeater to extend the distance of ZigBee network or avoid an obstacle that may be located between two wireless devices.
• The ZT-2510 series module is small-sized wireless ZigBee repeater based on the IEEE802.15.4 standard. It supports network routing and signal relay transmission function in a personal area ZigBee network. The typical transmission of ICP DAS ZT series ZigBee products is 700 meters (LOS, line of sight), with a transmission frequency range of between 2.405 GHz and 2.48 GHz, separated into 5 MHz sectors, providing 16 channels and 16384 PAN IDs. ZT-2000 series is a long distance wireless repeater and you are able to use it to extend the transmission range and improve the quality of wireless signal.

ZigBee Bridge:

• ZT-2530M is a ZigBee Bridge used to connect two different ZigBee networks. The absorption of wireless signals by buildings and other obstacles in the urban environments significantly impair wireless transmission. Therefore, ICP DAS provides the new ZT-2530M - the ZigBee bridge, which is equipped with dual antennas and combined a ZigBee coordinator with a ZigBee router. It can be full hardware configuration, and be used to bridge the communication between indoor and outdoor units or divide complex network to enhance efficiency. The ICP DAS ZigBee products are designed primarily to help users to build a wireless communication system in an environment where it is hard to physically wire up the devices. They are widely used in industrial control, embedded sensing, medical data collection, smoke and intruder warning, building automation, home automation and so on.

Features:

• ISM 2.4 GHz Operating Frequency
• Fully Compliant with 2.4 G (IEEE802.15.4/ ZigBee Specifications)
• Fully Compliant with ZigBee Pro (ZigBee 2007)
• Wireless Transmission Range up to 700 m (Default)
• Adjustable RF Transmission Output Power
• GUI Configuration Software (Windows Version)
• Supports AES-128 Encryption for the Wireless Communication
• DIN-Rail Mountable

• The ZB-2510 series are ZigBee-based repeater modules included in the ICP DAS product line. The main difference between these products is the transmission range. The ZB-2510 and ZB-2510-T support an extended transmission range of up to 100 meters, whereas the ZB-2510P and ZB-2510-PA can transmit to a maximum of 700 meters. All modules are able to operate in broadcast and user-defi ned route modes. When the repeater is set to broadcast mode, the transmission route is constructed by the ZigBee Host. The repeater will forward any data that it receives using broadcast mode. The advantage of this mode is that the repeater can be deployed in a “haphazard” manner without any concern about positioning. However, the main fl aw of this mode is that if there are too many broadcast data packets in a ZigBee network, it will cause the network to crash. In contrast, when the repeater is set to user-defi ned route mode, it will only forward data using the user confi gured route. The benefi t of this mode is that the data loading of the ZigBee network will be reduced, but the user must plan the data transmission route for the entire ZigBee network before setting up the application. If a mistake is made on even one repeater point, the entire ZigBee network will be invalid.

• ISM 2.4 GHz Operating Frequency
• Fully Compliant with 2.4 G
• IEEE802.15.4/ZigBee Speci cations
• Wireless Transmission Range up to 100 m (ZB-2510/ZB-2510-T) 
• Wireless Transmission Range up to 700 m  
• (ZB-2510P/ZB-2510-PA) 
• USB Setting Interface 
• GUI Con guration Software (Windows Version) 
• DIN-Rail Mountable

ZigBee Sniffer:

• MDC-211-ZT Modbus data concentrator developed by ICP DAS, with Ethernet, ZigBee Wireless, RS-232 and RS-485 communication interfaces, can link the Modbus RTU devices to the Ethernet network. MDC-211-ZT can read the data of Modbus RTU device according to the user-defi ned command table, and integrate the data of diff erent Modbus RTU devices into the format of the continuous address so that the remote monitor host can connect to MDC-211-ZT from Ethernet to access the data of multiple Modbus RTU devices at once. 
• Through MDC-211-ZT's Modbus data centralized management function, as well as the Ethernet network convenient link and the communication ability, it can quickly establish a stable remote monitoring system, simplify the complexity during the process of data acquisition operation, reduces the Ethernet network traffi c load, and enhances the system effi ciency

• ISM 2.4 GHz Operating Frequency(IEEE802.15.4/ZigBee Pro)
• Wireless Transmission Range up to 700 m (Default)
• Supports the Modbus RTU Master and Slave
• Upgrade Modbus/RTU Devices with Ethernet Communication Ability
• Accelerate the Reading of Multiple Modbus/RTU Devices
• Supports Execution of up to 240 Modbus Polling Commands
• Supports up to 9600 Modbus Registers for each DI/DO/AI/AO
• Supports Friendly Web UI Configuration
• Easy System Backup and Copy with .CSV file