Nimbus Technologies

Dombivli East, Dombivli, Thane, Maharashtra

GST No. 27AAEFN5759R1ZC

Call 08047630722 77% Response Rate

Send Email

Modbus Multiplexer And Modbus Gateway Product

Wholesale Trader of a wide range of products which include usb to rs232 convertor, i-7530t rs232 converter, gw-7552 profibus to modbus gateway, i-7561 rs232 converter, tgw-718 serial to ethernet convertor and usb to rs485 convertor.

USB To RS232 Convertor

Rs 7,000 / PieceGet Best Price

Product Brochure

Storage Temperature	-25 to 85 deg C
Brand	3onedat
Warranty	5 yrs
Speed	12 Mbps(full-speed)
Weight	70 g
Humidity	5%-95% (non-condensing)
ESD Protection	15 KV embedded
Dimensions	70 mm x 35 mm x 18 mm
Wiring	1.5 m
Baudrate	300 bps to 115.2 Kbps
FIFO	128 bytes

Features:

Small volume,easy installation
No power supply needed,plug and play Single chip(ASIC) USB port to serial port communication Automatic detective serial signal rate
Accord USB1.1or2.0,EIA RS232 standard USB full-speed to 12Mbps
LED indication:RXD/TXD(RS-232)

View Complete details

get quote request a call back

I-7530T RS232 Converter

Rs 20,000 / PieceGet Best Price

Product Brochure

Dimension	72 mm x 118 mm x 33 mm
Humidity	10 ~ 90% RH, non-condensing
Storage Temp	-30 ~ 80 deg C
Operating Temp	-25 ~ 75 deg C
Installation	DIN-Rail
Power Consumption	1 W
Receive Buffer	900 data frames
COM	RS-232
Controller	Microprocessor inside with 20 MHz
Model Number	I-7530T

Features:

Compatible with CAN specification 2.0A and 2.0B
Fully compatible with ISO 11898-2 standard (for I-7530/I-7530T)
Fully compatible with ISO 11898-3 standard (low speed fault tolerance) (for I-7530-FT)
Support various baud rate from 10K bps to 1M bps
Jumper for 120 Ω terminal resistor (for I-7530/I-7530T)
Software configurable CAN and RS-232 communication parameters
Power, data flow and error indicator for CAN and RS-232
Watchdog inside
Support transparent communication mode
1000 frames in CAN received buffer and 900 frames in RS-232 received buffer
Full-duplex communication mode of RS-232 devices is not supported

Specification:

Model	Description
I-7530	RS-232/CAN bus converter with 9-pin D-sub connector
I-7530A-MR	Modbus RTU to CAN converter
I-7530A	Intelligent RS-232/485/422 to CAN converter
I-7531-UT	CAN bus isolated repeater with screw terminal connector, -40 to 85°C operating temperature
I-7540D-MTCP	CAN to Ethernet/ Modbus TCP/ Modbus RTU Converter
I-7565-DM	Internet communication controller with one CAN bus, one RS-232, one RS-485 and one Ethernet (Metal casing)

View Complete details

get quote request a call back

GW-7552 Profibus To Modbus Gateway

Rs 30,000 / PieceGet Best Price

Product Brochure

Usage/Application	Industrial
Model Name/Number	GW-7552
Operating Temperature	-25 - 75 Deg C
Dimension	72 mm x 33 mm x 119 mm
CPU	80186, 80 MHz or compatible
ESD Protection	4 kV class A
Controller	Siemens SPC3
Connector	9-pin female D-Sub
Isolation	3000 VDC for DC-to-DC, 2500 Vrms for bus-to-logic
Power Consumption	2.5 W
Installation	DIN-Rail
Storage Temperature	-30 - 85 Deg C
Humidity	5 - 95% RH, non-condensing

The GW-7552 gateway is specially designed for the slave device of profibus dp protocol.

Features:

Protocol & Hierarchy: DP-V0 Slave
Detect transmission rate (9.6 to 12000 kbps)automatically
128 bytes max input data length
130 bytes max output data length
Support Modbus Master and Slave mode
Support Modbus RTU and ASCII format
Address 0~126 set by DIP switch or EEPROM
Support several kinds of baudrate for COM1 from 2.4 to 115.2 kbps
Network Isolation Protection: High Speed iCoupler
3000VDC isolation protection on PROFIBUS side
4KV ESD Protection

Specification:

Model	Description
GW-7552 GW-7552-M	PROFIBUS DP slave to Modbus RTU/ASCII gateway PROFIBUS DP slave to Modbus RTU/ASCII gateway(Metal casing)
GW-7553 GW-7553-M	PROFIBUS DP slave to Modbus TCP/RTU/ASCII gateway PROFIBUS DP slave to Modbus TCP/RTU/ASCII gateway(Metal casing)
GW-7553-CPM GW-7553-CPM-M	PROFIBUS DP slave to CANopen Gateway PROFIBUS DP slave to CANopen Gateway (Metal casing)
GW-7557 GW-7557-M	PROFIBUS DP slave to HART master gateway PROFIBUS DP slave to HART master gateway(Metal casing)

View Complete details

get quote request a call back

I-7561 RS232 Converter

Rs 7,500 / PieceGet Best Price

Product Brochure

Dimension	72 mm x 115 mm x 35 mm
Model Name/Number	I-7561
USB	Fully Compliant with the USB 1.1/2.0/3.0
Transmission Distance	Max. 1,200 m at 9.6 kbps
Speed	300 ~ 115200 bps
Cable Included	CA-USB18 (1.8 m Cable) x 1
Power Consumption	0.5 W
Input Voltage Range	+5 VDC from USB
Installation	DIN-Rail Mounting

Features:

Fully Compliant with the USB 1.1/2.0/3.0
3000 VDC Isolation Protection on the RS-232/422/485 side
ESD Protection for the RS-232/422/485 Data Line
Transmission speed up to 921.6 kbps (For I-7561U)
No External Power Supply required
Automatic RS-485 Direction Control
Operating Temperatures, -25 °C ~ +75 °C
DIN-Rail Mounting

Specification:

USB to RS-232/422/485 and CAN converter/Hub
Model	Function	Interface	Isolation
I-7560	Converter	USB to RS-232	Non-isolated
I-7560U	Converter	USB to RS-232	Non-isolated
tM-7561	Converter	USB to 485	2500 VDC Isolation on RS-485 side
USB-2514	Converter	USB to 4-Port RS-232 Converter	Non-isolated
I-7561	Converter	USB to RS-232/422/485	3000 VDC Isolation on RS-232/422/485 side
I-7561U	Converter	USB to RS-232/422/485	3000 VDC Isolation on RS-232/422/485 side
I-7563	Converter and 3-Channel Hub	USB to RS-485 Hub	3000 VDC Isolation on RS-485 side
I-7563U	Converter and 3-Channel Hub	USB to RS-485 Hub	3000 VDC Isolation on RS-485 side
I-7565	Converter	USB to CAN	3000 VDC Isolation on CAN side
I-7565-H1	Converter	USB to 1-port (high performance)	3000 VDC on CAN side
I-7565-H2	Converter	USB to 2-port (high performance)	3000 VDC on CAN side
I-7565-CPM	Converter	USB to CANopen	3000 VDC on CAN side
I-7565-DNM	Converter	USB to DeviceNet	3000 VDC on CAN side

View Complete details

get quote request a call back

TGW-718 Serial To Ethernet Convertor

Rs 15,000 / PieceGet Best Price

Product Brochure

Model Name/Number	TGW-718
Humidity	10 ~ 90% RH, non-condensing
CPU	32-bit ARM
Storage Temperature	-30 ~ +80 DegreeC
Operating Temperature	-25 ~ +75 DegreeC
Mounting	DIN-Rail
Power Input	48 VDC
Power Consumption	0.05 A, 24 VDC

Features:

Supports Modbus TCP/UDP master and slave
Supports Modbus RTU/ASCII master and slave
Max. TCP connections (masters) per serial port: 32 (tGW-71x), 16 (tGW-72x) or 10 (tGW-73x)
Read-cache ensures faster Modbus TCP/UDP response
Supports UDP responder for device discovery (UDP Search)
Static IP or DHCP network configuration
Easy firmware update via the Ethernet (BOOTP, TFTP)
Tiny Web server for configuration (HTTP)
Contains a 32-bit MCU that efficiently handles network traffic
10/100 Base-TX Ethernet, RJ-45 x 1 (Auto-negotiating, auto MDI/MDIX, LED Indicators)
Includes redundant power inputs: PoE (IEEE 802.3af, Class 1) and DC jack
Allows automatic RS-485 direction control
3000 VDC Isolation and +/-4 kV ESD protection for i versions
Male DB-9 or terminal block connector for easy wiring
Tiny form-factor and low power consumption
RoHS compliant & no Halogen
Cost-effective Modbus gateway

Specification:

Model	Description
tGW-712 CR	Tiny Modbus/TCP to RTU/ASCII Gateway with PoE and 1 RS-232 Port (RoHS)
tGW-722 CR	Tiny Modbus/TCP to RTU/ASCII Gateway with PoE and 2 RS-232 Ports (RoHS)
tGW-732 CR	Tiny Modbus/TCP to RTU/ASCII Gateway with PoE and 3 RS-232 Ports (RoHS)
tGW-715 CR	Tiny Modbus/TCP to RTU/ASCII Gateway with PoE and 1 RS-422/485 Port (RoHS)
tGW-725 CR	Tiny Modbus/TCP to RTU/ASCII Gateway with PoE and 2 RS-485 Ports (RoHS)
tGW-735 CR	Tiny Modbus/TCP to RTU/ASCII Gateway with PoE and 3 RS-485 Ports (RoHS)
tGW-718 CR	Tiny Modbus/TCP to RTU/ASCII Gateway with PoE and 1 RS-232/422/485 Port (RoHS)
tGW-724 CR	Tiny Modbus/TCP to RTU/ASCII Gateway with PoE, 1 RS-232 and 1 485 Ports (RoHS)
tGW-734 CR	Tiny Modbus/TCP to RTU/ASCII Gateway with PoE, 2 RS-232 and 1 485 Ports (RoHS)

View Complete details

get quote request a call back

USB To RS485 Convertor

Rs 8,000 / PieceGet Best Price

Product Brochure

Model Name/Number	USB485B
Usage/Application	Laptop
Humidity	Relative humidity 5% to 95%
Weight	70 g
Warranty	3 yrs
Storage Temperature	-25 to 85 degC
Dimension	70 mm x 35 mm x 18 mm
Speed	12 Mbps (Full-speed USB)
ESD Protection	15 kV
Baud Rate	300 bps to 230400 bps

Features:

Small volume,easy installation.
No power supply needed,plug and play.
Single chip (ASIC) USB port to serial port communication.
Transmit distance reach up to 1800 M at the rate of 115200bps.
Automatic send data control,auto distinguish and sense direction adopt data transfer.
Auto sense serial signa lrate,zero delay automatic transmit.

View Complete details

get quote request a call back

I-7514 U RS232 Converter

Rs 9,000 / PieceGet Best Price

Product Brochure

Storage Temperature	-30-+80 Deg C
Dimension	72 mm x 122 mm x 35 mm
Humidity	10 ~ 90% RH, non-condensing
Model Name/Number	I-7514 U
Operating Temperature	-25-+75 Deg C
Installation	DIN-Rail
Power Consumption	1.2 W
Input Voltage Range	+10 VDC ~ +30 VDC

Features:

True RS-485 Star Wiring Hub
Independent RS-485 driver for each channel
LEDs for indicating RS-485 TxD/RxD activity
Auto Switching baud rate, 300 ~ 115200 bps and fixed baud rate setting via rotary switch, 1200 ~ 115200 bps
Hubs can be daisy chained for 256 channels
120 Ω termination resistor for each channel
DIN-Rail

Specification:

RS-232/422/485 converter/repeater/Hub
Model	Function	Interface		Isolation
tM-7520U	Converter		RS-232 to RS-485	2500 VDC Isolation on RS-232 side
I-7520	Converter		RS-232 to RS-485	3000 VDC Isolation on RS-232 side
I-7520R	Converter		RS-232 to RS-485	3000 VDC Isolation on RS-485 side
I-7520A	Converter		RS-232 to RS-422/485	3000 VDC Isolation on RS-232 side
I-7520AR	Converter		RS-232 to RS-422/485	3000 VDC Isolation on RS-422/485 side
I-7520U4	Converter and 4-Channel Hub		RS-232 to RS-485	2500 VDC Isolation
I-7551	Repeater		RS-232 to RS-232	3000 VDC Isolation on 3 ways
tM-7510U	Repeater		RS-485	2500 VDC Isolation
I-7510	Repeater		RS-485	3000 VDC Isolation
I-7510A	Repeater		RS-422/485	3000 VDC Isolation
I-7510AR	Repeater		RS-422/485	3000 VDC Isolation on 3 ways
I-7510P	Repeater		RS-485	5000 VDC Isolation on 3 ways
I-7513	3-Channel Hub		RS-485	3000 VDC Isolation on 3 ways
I-7514U	4-Channel Hub		RS-485	2500 VDC Isolation

View Complete details

get quote request a call back

USB TO RS232/RS485/RS422 Convertor

Rs 9,000 / PieceGet Best Price

Product Brochure

Power Supply	8KV static protection
Brand	3onedat
Warranty	5 yrs
Weight	226 g
Humidity	5%-95%(non-condensing)
Input Voltage	12 VDC
Band Rate	115200 bps
Data Bites	8 bit
Working Temperature	-4-85 Deg C

Features:

Convert USB to 1RS-232 or RS-485 or RS-422
Low CPU occupation rate,steadily performance
RS-485/422 can establish at most 32 nodes
RS-485/422 transmit distance can reach up to1200m
Serial port support 2KVAC isolation protect
Industrial grade design,IP30 degree of protection
No fan,low consumption design
Plug and play,9-48VDC external power supply or USB power supply or both of them.

View Complete details

get quote request a call back

HRT-710 Hart to Modbus RTU Convertor

Rs 25,000 / PieceGet Best Price

Product Brochure

Usage/Application	Industrial
Model Name/Number	HRT-710
Baud Rate	1200 bps
CPU	32 bit, 100 MHz or compatible
Watchdog	Watchdog IC
ESD Protection	4 kV class A
Protocol	Modbus RTU / Modbus ASCII
Dimensions	72 mm x 35 mm x 121 mm
Installation	DIN-Rail or Wall Mounting
Humidity	5% ~ 95% RH, non-condensing
Storage Temp	-30 deg C ~ +85 deg C

Features:

Support HART Short/Long frame
Support HART Burst mode
Allow two HART Masters
Working in point-to-point or multi-drop HART mode
Connecting up to 15 HART modules
Support Modbus RTU and ASCII format
Support Modbus Slave mode
Support firmware update via Com Port. (FW_v1.2 and HW_v1.2)
Support on-line replacement of HART devices. (FW_v1.5)
Support acquire Long Frame Address automatically (FW_v1.5)
Isolated COM Port : RS-232/422/485
Provide LED indicators
Built-in Watchdog
DIN Rail or Wall Mounting

Specification:

Gateway
Module	Type	Description
HRT-310	Modbus RTU/ASCII to HART Gateway (Upright)	Designed as the HART master device and allows MB/RTU & ASCII master to access the HART devices
HRT-710	Modbus/RTU & ASCII to HART gateway	Designed as the HART master device and allows MB/RTU & ASCII master to access the HART devices
HRT-711	Modbus TCP/UDP to HART Gateway	Designed as the HART master device and allows MB/TCP client to access the HART devices
GW-7557	PROFIBUS to HART gateway	Designed as the HART master device and allows PROFIBUS DP master to access the HART devices

View Complete details

get quote request a call back

HRT-711 Modbus TCP Module

Rs 29,000 / PieceGet Best Price

Product Brochure

Usage/Application	Industrial
Model Name/Number	HRT-711
Power Supply	Unregulated +10 ~ +30 VDC
Humidity	5% ~ 95% RH, non-condensing
Power Consumption	1 W
Watchdog	Watchdog IC
ESD Protection	4 kV class A
Installation	DIN-Rail or Wall Mounting
Dimensions	72 mm x 35 mm x 121 mm

Features:

Support HART Short/Long frame
Support HART Burst mode
Allow two HART Masters
Working in point-to-point or multi-drop HART mode
Connecting up to 15 HART modules
Support Modbus TCP/UDP server
Support Modbus Slave mode
Support firmware update via Com Port
Support on-line replacement of HART devices
Support acquire Long Frame Address automatically
Provide LED indicators
Built-in Watchdog
Mountable on DIN Rai

Specification:

Gateway
Module	Type	Description
HRT-310	Modbus RTU/ASCII to HART Gateway (Upright)	Designed as the HART master device and allows MB/RTU & ASCII master to access the HART devices
HRT-710	Modbus/RTU & ASCII to HART gateway	Designed as the HART master device and allows MB/RTU & ASCII master to access the HART devices
HRT-711	Modbus TCP/UDP to HART Gateway	Designed as the HART master device and allows MB/TCP client to access the HART devices
GW-7557	PROFIBUS to HART gateway	Designed as the HART master device and allows PROFIBUS DP master to access the HART devices

View Complete details

get quote request a call back

GW-7662 Modbus Gateway

Rs 32,000 / PieceGet Best Price

Product Brochure

Usage/Application	Industrial
Operating Temperature	-25 - 75 Deg C
Conformance Classes	Class B
Protocol	Profinet IO Device
Cycle Time	1 ms (min.)
Controller	10/100Base-TX Ethernet Controller (Auto-negotiating, Auto_MDIX)
Power Consumption	3.4 W
Dimensions	42 mm x 76 mm x 119 mm
Humidity	10 ~ 90% RH, non-condensing
Model Number	GW-7662
Storage Temperature	-30 - 80 Deg C

Features:

Protocol: Profinet IO Device
Profinet Conformance Class B and RT Class 1
Cyclic Time: 1ms (min)
Generic GSDML File Provided (Version 2.25)
Max length of input/output data is 512/512 Bytes
Support Modbus Master and Slave mode
Support Modbus RTU and ASCII format
Support several kinds of baud rate for COM1 from 1.2 to 460.8 kbps
Provide LED indicators
4 kV Contact ESD protection for any terminal

View Complete details

get quote request a call back

GW-7553 Profibus Converter

Rs 35,000 / PieceGet Best Price

Product Brochure

Brand	ICPCON
CPU	80186, 80 MHz or compatible
ESD Protection	4 kV class A
Controller	Profichip VPC3+C
Connector	9-pin female D-Sub
Isolation	3000 VDC for DC-to-DC, 2500 Vrms for bus-to-logic
Power Consumption	2.5 W
Dimensions	72 mm x 33 mm x 119 mm
Humidity	5 ~ 95% RH, non-condensing
Operating Temp	-25-75 Deg C
Model Number	GW-7553
Operating Temperature	-25 - 75 Deg C

Features:

Protocol & Hierarchy: DP-V0 Slave
Detect transmission rate (9.6 to 12000 kbps)automatically
128 bytes max input data length
131 bytes max output data length
Support Modbus Master and Slave mode
Support Modbus RTU, ASCII and TCP format
Address 0~126 set by DIP switch or EEPROM
Support several kinds of baudrate for COM1 from 2.4 to 115.2 kbps
Network Isolation Protection: High Speed iCoupler
3000 VDCisolation protection on PROFIBUS side
4 kV ESD Protection

View Complete details

get quote request a call back

I-7530A-MR Modbus RTU to Can Converter

Rs 14,000 / PieceGet Best Price

Product Brochure

Usage/Application	Industrial
Model Name/Number	I-7530A-MR
Compatible Brand	ICPDAS
Power Supply	+10 VDC ~ +30 VDC
Operating Temperature	-25 Deg to 75 Deg C
Rtu Interface	1 x RS-232 1 x RS-485 1 x RS-422 (these ports can't be used simultaneously)
CAN Port	1 (Baud Rate:10 k ~ 1 M bps)
CAN Port Isolation	3000 VDC for DC-to-DC, 2500 Vrms for photo-couple
Storage Temperature	-30 Deg C to 80 Deg C
Humidity	10-90% non-condensing

Introduction:

The PLC, HMI and SCADA are popular in the various industrial control applications, but most of them don't provide CAN interfaces. Users always experienced difficulties due to connecting the sensors or actuators which only have a CAN interface. The basic function of I-7530A-MR is compatible with I-7530A, and the "MR" stands for "Modbus RTU". So, the I-7530A-MR supports Modbus RTU protocol in its RS-232/422/485 port. Modbus RTU is popular and widely supported by most of the PLCs, HMIs, and SCADAs. I-7530A-MR is helpful to use standard Modbus RTU protocol to access CAN networks without difficulties. And with the special designed firmware, beside normal received CAN message buffer, it offers special memory space to save up to 100 kinds of CAN messages which are urgent and must be processed immediately. The feature helps the PLC, HMI and SCADA to use Modbus RTU function code 3,4,16 to access CAN devices in a easy way. In Modbus RTU mode, it allows a Modbus RTU master to communicate with CAN devices on a CAN network. The following figure shows the application architecture of this mode.

Features:

RoHS Design
Fully compatible with ISO 11898-2 standard
Programmable CAN bus baud rate from 10 kbps to 1 Mbps or user-defined baud rate
Support CAN bus acceptance filter configuration
Support firmware update via RS-232
Provide utility tool for module setting and CAN bus communication testing
Built-in jumper to select 120Ω terminal resistor
CAN buffer: 128 data frames ; UART buffer: 256 bytes
Power, data flow and error indicator for CAN and UART status
Hardware Watchdog design
Convert CAN message to specific ASCII command string (Normal mode)
Convert specific ASCII command string to CAN message (Normal mode)
Provide the transparent communication between the RS-232/485/422 devices via CAN bus (Pair-connection mode)
In Modbus Slave mode, I-7530A-MR supports function code 0x03, 0x04, 0x06 (firmware version v1.11 or later), and 0x10 of Modbus RTU command for reading or writing CAN message (Modbus Slave mode). (New)
Support Modbus Master function (firmware version v1.11 or later). (New)

View Complete details

get quote request a call back

TSH-735 Multi Master Port RS485 Convertor

Rs 18,000 / PieceGet Best Price

Product Brochure

Model Name/Number	TSH-735
CPU	32-bit MCU
Ethernet	10/100 Base-TX,8-pin RJ-45 x 1,(Auto-negotiating,Auto-MDI/MDIX,LED indicator)
COM Port	3 x RS-485
Self-Tuner	Yes,automatic RS-485 direction control
ESD Protection	+/-4 kV
Baud Rate	115200 bps Max.
Dimensions	52 mm x 95 mm x 27 mm
Operating Temperature	-25 DegreeC ~ +75 DegreeC
Storage Temperature	-30 DegreeC ~ +80 DegreeC

Features:

Supports Baud Rate conversion application
Supports Modbus RTU/ASCII protocol conversion
Supports two masters sharing one slave port for tSH-73x Series only
Raw data mode for most query-response protocols
Built-in web server for easy configuration (HTTP)
Redundant power inputs: PoE (IEEE 802.3af, Class 1) and DC jack
Allows automatic RS-485 direction control
Tiny form-factor and low power consumption

Specification:

tSH-700 Series (Tiny Serial Port Sharer with PoE and DC jack)
Model (Non-Isolated)	Model (Isolated)	RS-232	RS-485	Application	COM1	COM2	COM3
tSH -732 CR	tSH -732i CR	3	-	Sharer	3-wire RS-232	3-wire RS-232	3-wire RS-232
tSH -735 CR	tSH -735i CR	-	3		2-wire RS-485	2-wire RS-485	2-wire RS-485
tSH -734 CR	tSH -734i CR	2	1		2-wire RS-485	3-wire RS-232	3-wire RS-232

View Complete details

get quote request a call back

MDC-714 Modbus Multiplexer

Rs 30,000 / PieceGet Best Price

Product Brochure

Model Name/Number	MDC-714
Material	Metal
Protocol	Modbus/TCP Slave
Max. Connection	8
Baudrate	1200
Dimension	102 mm x 125 mm x 28 mm
Power Consumption	2.5 W
Relative Humidity	10 ~ 90% RH, Non-condensing
Storage Temperature	-30 Degree C ~ +80 Degree C
Operating Temperature	-25 Degree C ~ +75 Degree C
Port	x1, 10/100 Base-TX

4 port Modbus Data Concentrator with RS232, RS485 & Ethernet Port.

Features:

Supports Modbus master/slave on the serial port and Modbus TCP slave on the Ethernet interface
Supports up to 8 simultaneous Modbus TCP connections at one time
Data pool for up to 9600 registers Modbus polling commands for up to 250 denitions
Easy con guration with a simple CSV le for quick start-up
HTML5 Web-based user interface
MDC-705i-DL supports data recording and storage to a removable microSD card

Specification:

Model	Description
MDC-711 CR	Modbus Data Concentrator with 1 x Ethernet and 1 x RS-232, 1 x RS-485 (RoHS)
MDC-714 CR	Modbus Data Concentrator with 1 x Ethernet and 1 x RS-232, 4 x RS-485 (RoHS)
MDC-741 CR	Modbus Data Concentrator with 1 x Ethernet and 4 x RS-232, 1 x RS-485 (RoHS)
MDC-771 CR	Modbus data concentrator with 1 x Ethernet and 7 x RS-232, 1 x RS-485 (RoHS)

View Complete details

get quote request a call back

EXPLORE MORE CATEGORIES