Nimbus Technologies

Nimbus Technologies

Nimbus Technologies

Dombivli East, Dombivli, Thane, Maharashtra

GST No. 27AAEFN5759R1ZC

Multi Port Communication Cards

Pioneers in the industry, we offer pci express, serial communication board with 2 rs-232 ports, universal pci, serial communication board with 2 isolated rs-422/485 ports, pci express, serial communication board with 2 isolated rs-232 ports, pci express, analog input board with 4-ch isolated dio, pci express analog output board and isa bus, analog input multifunction board from India.

PCI Express, Serial Communication Board with 2 RS-232 ports

REQUEST CALLBACK
  • PCI Express, Serial Communication Board with 2 RS-232 ports
  • PCI Express, Serial Communication Board with 2 RS-232 ports

Ask for Price

Product Price: Ask Latest Price

Product Details:

Minimum Order Quantity1 Unit
Dimensions94 x 109 x 22 (W x L x D)
No. Of Ports2 x RS-232 (TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND)
Operating Temperature0 ~ +60 DegreeC
Operating Humidity5 ~ 85% RH, Non-condensing
Typical Power Consumption120 mA @ 5 V
BrandICPDAS
ModelPCIe-S112

Introduction:
The PCIe-S112 series card provides 2 RS-232 serial ports. It is equipped with a 128-byte hardware FIFO for each port, supports for speed up to 921600 bps and supports full-duplex communication.
 
The driver provides a maximum of 256 KB software FIFO for each COM port under Windows. It's practical for large file transmission.
 
The data lines of each serial ports on i version PCIe cards come with photocouplers design. The on-board photo couplers use a short optical transmission path to transfer a signal between elements of a circuit, and keep the data lines electrically isolated. It can help cutting down on ground loops, common mode voltages and block voltage spikes, provide electrical isolation, and offer significant protection from serious over-voltage conditions in one circuit affecting the other.
 
In harsh industrial environments, the on-board ESD protection component (for i version) diverts the potentially damaging charge away from sensitive circuit to protects the computer and equipment from the sudden and momentary electric current.
 
The serial communication card are designed for use with intelligent devices like bar code reader, serial printers, intelligent sensors, instrumentation equipment, computers and almost any device with an RS-232 port.

Specifications:
COM Ports:
Ports2 x RS-232 (TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND)
Baud Rate300 ~ 921600 bps
ParityNone, Even, Odd, Mark, Space
Data Bit5, 6, 7, 8
Stop Bit1, 1.5, 2
FIFO SizeInternal 256 bytes
Connector:
Connector2 x DB9 (Male)
Power :
Consumption120 mA @ 5 V
Dimention:
Dimensions (mm)94 x 109 x 22 (W x L x D)
Environmental:
Operating Temperature0 ~ +60°C
Storage Temperature-20 ~ 70°C
Humidity5 ~ 85% RH, Non-condensing

Yes! I am Interested

Universal PCI, Serial Communication Board with 2 Isolated RS-422/485 ports

REQUEST CALLBACK
  • Universal PCI, Serial Communication Board with 2 Isolated RS-422/485 ports
  • Universal PCI, Serial Communication Board with 2 Isolated RS-422/485 ports
  • Universal PCI, Serial Communication Board with 2 Isolated RS-422/485 ports

Ask for Price

Product Price: Ask Latest Price

Product Brochure

Product Details:

Minimum Order Quantity1 Unit
Model Name/NumberVXC-142iAU
Connector Type2 x DB9 (Male)
No. Of Ports2 x RS-422/485
Dimensions90 x 134 x 22 (W x L x D)
Isolation2500 Vrms Isolation for i versions
Bus TypeUniversal PCI, 3.3 V and 5 V, 33 MHz, 32-bit, Plug and Play

Introduction:
The VXC-142 series card provides 2 RS-422/RS-485 serial ports. Each port can be configured as either RS-485 for half-duplex or RS-422 for full-duplex communication. It supports for speed up to 115200 bps and supports full-duplex communication.
 
Users may specify a COM port number manually by setting DIP switch, or let the driver choose an available number automatically. The driver provides a maximum of 128 KB software FIFO for each COM port under Windows. It's practical for large file transmission.
 
The data lines of each serial ports on i version VXC cards come with photocouplers design. The on-board photo couplers use a short optical transmission path to transfer a signal between elements of a circuit, and keep the data lines electrically isolated. It can help cutting down on ground loops, common mode voltages and block voltage spikes, provide electrical isolation, and offer significant protection from serious over-voltage conditions in one circuit affecting the other.
 
In harsh industrial environments, the on-board ESD protection component (for i version) diverts the potentially damaging charge away from sensitive circuit to protects the computer and equipment from the sudden and momentary electric current.

Features:
  • Supports 3.3 V/5 V PCI bus
  • Provides 2 RS-422/485 ports
  • Built-in COM-Selector
  • 128 KB Software Buffer (max.) for Each COM Port Under Windows
  • 128-byte Hardware FIFO for Each Port
  • ±4 kV ESD Protection for i versions
  • 2500 VDC Isolation for i versions
  • Short Card Design

Yes! I am Interested

PCI Express, Serial Communication Board with 2 Isolated RS-232 ports

REQUEST CALLBACK
  • PCI Express, Serial Communication Board with 2 Isolated RS-232 ports
  • PCI Express, Serial Communication Board with 2 Isolated RS-232 ports
  • PCI Express, Serial Communication Board with 2 Isolated RS-232 ports
  • PCI Express, Serial Communication Board with 2 Isolated RS-232 ports

Ask for Price

Product Price: Ask Latest Price

Product Brochure

Product Details:

BrandICPDAS
Model Name/NumberVEX-112i
Connector Type2 x DB9 (Male)
No. Of Ports2 x RS-232 (TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND)
Dimensions94 x 110 x 22 (W x L x D)
Isolation2500 VDC

Introduction:
The VXC-112 series card provides 2 RS-232 serial ports. It is equipped with a 128-byte hardware FIFO for each port, supports for speed up to 115200 bps and supports full-duplex communication.
Users may specify a COM port number manually by setting DIP switch, or let the driver choose an available number automatically. The driver provides a maximum of 128 KB software FIFO for each COM port under Windows. It's practical for large file transmission.
  The data lines of each serial ports on i version VXC cards come with photocouplers design. The on-board photo couplers use a short optical transmission path to transfer a signal between elements of a circuit, and keep the data lines electrically isolated. It can help cutting down on ground loops, common mode voltages and block voltage spikes, provide electrical isolation, and offer significant protection from serious over-voltage conditions in one circuit affecting the other.
  In harsh industrial environments, the on-board ESD protection component (for i version) diverts the potentially damaging charge away from sensitive circuit to protects the computer and equipment from the sudden and momentary electric current.
  The serial communication card are designed for use with intelligent devices like bar code reader, serial printers, intelligent sensors, instrumentation equipment, computers and almost any device with an RS-232 port.

Features:
  • Supports PCI Express x1
  • Provides 2 RS-232 ports
  • Built-in COM-Selector
  • 128 KB Software Buffer (max.) for Each COM Port Under Windows
  • 128-byte Hardware FIFO for Each Port
  • ±4 kV ESD Protection for i versions
  • 2500 VDC Isolation for i versions
  • Short Card Design

Yes! I am Interested

Save time! Get the Best Deal

*Your information is safe with us.

PCI Express, Analog Input Board with 4-ch Isolated DIO

REQUEST CALLBACK
  • PCI Express, Analog Input Board with 4-ch Isolated DIO
  • PCI Express, Analog Input Board with 4-ch Isolated DIO

Ask for Price

Product Price: Ask Latest Price

Product Brochure

Product Details:

Minimum Order Quantity1 Unit
Dimensions80 x 107 x 22
Physical InterfacePCI Express x 1 (32 Bit Data bus)
No. Of PortsAI:8 single-ended, DI:4 (5 V/TTL), DO: 4 (5 V/CMOS)
Operating Temperature0 ~ +60 DegreeC
Operating Humidity5 ~ 85% RH, Non-condensing
Model NamePCIe-8620

Introduction:
The PCIe-8620 is a powerful multifunction board based on the PCI Express. With a FIFO of 2048 samples, the maximum sampling rate of PCIe-8620 is up to 200 kS/s with 8 16-bit A/D converters simultaneously sampling on each channel. The PCIe-8620 has 4 digital input channels, 4 digital output channels, and two PWM output channels.
PCIe-8620 supports more kinds of trigger modes for A/D conversion: software trigger and internal pacer trigger. The software trigger can acquire a sample whenever needed, while the internal pacer saves CPU loading by triggering the sampling at pre-programmed frequency. The PCIe-8620 also includes an onboard Card ID switch that can be used to set a unique ID for each board so that they can be instantly recognized if two or more boards are installed in the same computer.
The cards support various OS versions, such as Linux, DOS, Windows. DLL and Active X control together with various language sample program based on Turbo C++, Borland C++, Microsoft C++, Visual C++, Borland Delphi, Borland C++ Builder, Visual Basic, C#.NET, Visual Basic.NET and LabVIEW are provided in order to help users to quickly and easily develop their own applications.

Features:
  • Supports PCI Express x 1, Full-profile or Low-profile
  • Card ID Function(SMD Switch)
  • Digital Output status readback
  • 16-bit AD Converter, 200kHz Sampling Rate for each channel
  • Built-in 2048 samples FIFO for Analog Inputs
  • Software Calibration
  • 4 channels Isolated Digital Input
  • 4 channels Isolated Digital Output
  • 8 channels Synchronous Sample&Hold Analog Input
  • 8 Single-ended Analog Input Channels

Yes! I am Interested

PCI Express Analog Output Board

REQUEST CALLBACK

Ask for Price

Product Price: Ask Latest Price

Product Brochure

Product Details:

Minimum Order Quantity1 Unit
BrandICPDAS
Analog Output4 (Voltage: +- 10 V Current: 0 ~ 20 mA) with 14 bit Resolution
Digital Input16 (5 V/TTL) TTL On Voltage:2.0 V Min. TTL OFF Voltage Level: 0.8 V Max.
Digital Output16 (5 V/CMOS)
PC BusPCI Express x 1 (8 bit Data Bus)
Power Consumption750 mA@ +3.3 V ; 350 mA@ +12 V
Model NumberPEX-DA4

Introduction:
For the PEX-DA series, their voltage output range is from -10 V to +10 V, and their current output range is from 0 to 20 mA. In addition, These cards also feature the following advantages by ICP DAS's innovation: Accurate and easy-to-use calibration. ICP DAS provides the software calibration instead of the manual calibration so that no jumpers and trim-pots are required anymore.

The calibration information can be saved in EEPROM for long-term use. Individual channel configuration.In other words, every channel can be individually configured as voltage output or current output! ICP DAS provides the Card ID function. Users can set card ID for each card and then recognize them one by one when more than two boards are used in a computer.

The cards support various OS versions, such as Linux, DOS, Windows. DLL and Active X control together with various language sample program based on Turbo C++, Borland C++, Microsoft C++, Visual C++, Borland Delphi, Borland C++ Builder, Visual Basic, C#.NET, Visual Basic.NET and LabVIEW are provided in order to help users to quickly and easily develop their own applications.

Features:
  • Supports PCI Express x1
  • 4 channels, 14-bit analog output
  • Voltage output range: ±10 V
  • Current output range: 0 ~ 20 mA (sink)
  • Two timer/counter interrupt sources
  • Software calibration
  • 16 channels Digital Input
  • 16 channels Digital Output
  • Card ID Function(SMD Switch)
  • Pull-high/Pull-low Jumpers for DI Ports

Yes! I am Interested

ISA Bus, Analog Input Multifunction Board

REQUEST CALLBACK
  • ISA Bus, Analog Input Multifunction Board
  • ISA Bus, Analog Input Multifunction Board
  • ISA Bus, Analog Input Multifunction Board

Ask for Price

Product Price: Ask Latest Price

Product Brochure

Product Details:

Minimum Order Quantity1 Unit
BrandICPDAS
Dimension122 X 175 X 22 (W x L x D)
Model NumberA-826PG
Analog I/O ChannelAnalog Input: 16 single-ended/8 differential ; Analog Output: 2
Digital I/O ChannelDigital Input: 16 (5 V/TTL) ; Digital Output: 16 (5 V/TTL)
PC Bus TypeISA (8-Bit)
Power Consumption950 mA @ +5 V

Introduction:
The A-826PG is 16-bit multifunction analog and digital I/O boards for the PC/AT compatible computer. The A-826PG offer 16 single-ended or 8 differential analog inputs, plus two channels of analog output with 12-bit resolution. In addition, The A-826PG has 16 digital input, 16 digital output , and one timer/counter channel. The A-826PG provides gain of 0.5, 1, 2 , 4, 8 while the A-826PG provides gains of 0.5 , 1 , 2 , 4, 8 . It has a maximum sampling rate of 100 k samples/Sec., DMA operation is jumper selectable for levels 1 or 3. Interrupts are jumper selectable between 3 and 15.
ICP DAS discontinue the /NDA model (without D/A function) since the standard model provides full functions that covers the requirement for /NDA version. Please contacts us for OEM/ODM project if you are interested on customized version (or /NDA model).

Features:
  • 16-bit A/D converter 
  • 12-bit D/A converter 
  • 16 single-ended or 8 differential input channels 
  • 100 k/s sampling rate 
  • Two 12-bit analog output channels 
  • Analog Output Range : 0 ~ 5 V , 0 ~ 10 V, 0 ~ EXT Ref 
  • Software programmable gain : 0.5 , 1 , 2 , 4, 8 
  • Interrupt handling 
  • A/D Trigger modes : Software Trigger, Pacer Trigger, External Trigger , Event Trigger 
  • A/D data transfer modes : polling , interrupt , DMA 
  • 16 digital input & 16 digital output 
  • 37 pin D-Sub connector

Yes! I am Interested

Save time! Get the Best Deal

*Your information is safe with us.

Universal PCI Bus Analog and Digital I/O Board

REQUEST CALLBACK
  • Universal PCI Bus Analog and Digital I/O Board
  • Universal PCI Bus Analog and Digital I/O Board
  • Universal PCI Bus Analog and Digital I/O Board

Ask for Price

Product Price: Ask Latest Price

Product Brochure

Product Details:

Minimum Order Quantity1 Unit
BrandICPDAS
No. Of ChannelsDI : 24 (Bi-Direction) +16 , DO: 24 (Bi-Direction) +16
Programmable DI/DO24
Model NumberPEX-D56

Introduction:
The PEX-D56 supports PCI Express bus. The PEX-D56 consists of three 8-bit bi-direction ports. The 8-bit ports are named as port A (PA), port B (PB) and port C (PC) respectively. All ports are configured as inputs upon power-up or reset. In addition, the PEX-D56 provides additional 16-bit digital inputs and 16-bit digital outputs.

The PEX-D56 has a Card ID switch with which users can recognize the board by the ID via software when using two or more PEX-D56 cards in one computer.
The cards support various OS versions, such as Linux, DOS, Windows. DLL and Active X control together with various language sample program based on Turbo C++, Borland c++, Microsoft C++, Visual C++, Borland Delphi, Borland C++ Builder, Visual Basic, C#.NET, Visual Basic.NET and LabVIEW are provided in order to help users to quickly and easily develop their own applications.

Features:
  • Supports PCI Express x1
  • 56 channels of digital I/O
  • Bi-direction programmable I/O ports under software control
  • 4 interrupt sources
  • Card ID Function(SMD Switch)
  • Digital Output status readback

Yes! I am Interested

X
 





Explore More Products