Nimbus Technologies
Dombivli East, Dombivli, Thane, Maharashtra
GST No. 27AAEFN5759R1ZC
Call 08047630722 77% Response Rate
Serial-Ethernet-USB Based Remote DAS modules
M-7017RC Standard Analog Input Module
Product Brochure
| Model Name/Number | M-7017RC |
| Interface | RS-485 |
| Baud Rate | 115200 bps |
| Power Consumption | 1.3 W |
| Dimension | 72 X 123 X 35 mm |
| Installation | DIN Rail or Wall Mounting |
| Humidity | 10-95% RH |
- RS-485 Industrial Multi-Drop Network
- I/O type and Range Programmable
- Easy Mounting and Connection
- Rugged Industrial Environmen
- Programmable Power-on Value and Safe Value
- Advanced DI Functions
- Overvoltage Protection
- Open Wire Detection
- Over-current Protection
- Virtual Channel to Channel Isolation
- Common Voltage Protection
- ESD Protection
- Dual Communication Protocols
Model with IO Specification:
|
Analog Input |
|||
|
Model |
AI |
||
|
Channel |
Voltage & Current Input |
Sensor Input |
|
|
M-7017 |
8 |
±150 mV, ±500 mV, ±1 V, ±5 V, ±10 V, ±20 mA, 0 ~ 20 mA, 4 ~ 20 mA |
- |
|
M-7018 |
8 |
±15 mV, ±50 mV, ±100 mV, |
Thermocouple: |
|
M-7018-16 |
16 |
±15 mV, ±50 mV, ±100 mV, |
Thermocouple: |
|
M-7015 |
6 |
|
2/3-wire RTD: |
View Complete details
M-7024 Standard Analog Output Module With RS485
Product Brochure
| Model Name/Number | M-7024 |
| Humidity | 5 to 95% RH, non-condensing |
| Storage Temperature | -40 to 85 deg C |
| Power Consumption | 2.4 W |
| LED Display | 1 LED as Power/ Communication indicator |
| Baud Rate | 115200 bps |
| Accuracy | +/-0.1% of FSR |
| Output Channels | 4 Channels |
| Output Type | 20 mA |
| Resolution | 14 bit |
| Operating Temperature | 25 to 75 Deg C |
- RS-485 Industrial Multi-Drop Network
- I/O type and Range Programmable
- Easy Mounting and Connection
- Rugged Industrial Environmen
- Programmable Power-on Value and Safe Value
- Advanced DI Functions
DI Latch Function
Low Speed Counter
- Overvoltage Protection
- Open Wire Detection
- Over-current Protection
- Virtual Channel to Channel Isolation
- Common Voltage Protection
- ESD Protection
- Dual Communication Protocols
Model with IO Specification:
|
Analog Output |
|||||
|
Model |
AO |
|
|
||
|
Channel |
Voltage Output |
Current Output |
DO Channel |
DI Channel |
|
|
M-7022 |
2 |
0 ~ +5 V, |
0 ~ +20 mA, |
- |
- |
|
M-7024R |
4 4 |
0 ~ +5 V, |
0 ~ +20 mA, |
- |
5 |
|
M-7024U(D) |
4 |
4 |
|||
|
M-7028(D) |
8 |
0 ~ +5 V, |
0 ~ +20 mA, |
- |
- |
View Complete details
ET-7017 Standard Analog Input Module With TCP
Product Brochure
| Model Name/Number | ET-7017 |
| Storage Temperature | -30 deg C - +80 deg C |
| Humidity | 5 - 90% RH, non-condensing |
| Installation | DIN-Rail or Wall mounting |
| Dimensions | 72 mm x 123 mm x 35 mm |
| Power Consumption | 0.10 A, 24 VDC Max |
| Ethernet | 1500 VDC |
| SRAM | 512 KB |
| Common Mode Rejection | 86 dB Min |
Feature:
- Power over Ethernet (PoE)
- Daisy-Chain Ethernet Cabling
- LAN Bypass
- Communication Security
- Support for both Modbus TCP and Modbus UDP Protocols
- Built-in I/O
- Dual Watchdog
- Highly Reliable Under Harsh Environment
- I/O Pair Connection
- Power-on Value and Safe Value
- Led indicators for DIO status
- Reset Button
- Two pair of power input pins
Model with IO Specification:
|
Analog Input |
||||
|
Model |
AI |
DO |
||
|
Channel |
Voltage & Current - Input |
Sensor Input |
Channel |
|
|
ET-7017 |
8 |
+/-150 mV, +/-500 mV, +/-1 V, +/-5 V, +/-10 V, +/-20 mA, |
- |
4 |
|
ET-7018Z |
10 |
+/-15 mV, +/-50 mV, +/-100 mV, |
Thermocouple: |
6 |
|
ET-7217-10 |
10 |
+/-150 mV, +/-500 mV, +/-1 V, |
- |
- |
View Complete details
ET-7024 Standard Analog Output Module With TCP
Product Brochure
| Humidity | 10 ~ 90% RH, Non-condensing |
| Storage Temperature | -30-+80 deg C |
| Installation | DIN-Rail or Wall mounting |
| Dimensions | 72 mm x 123 mm x 35 mm |
| Consumption | 4.2 W |
| Powered from Terminal Block | 30 VDC |
| Current Load Resistance | 500 Q |
| Max. Input Frequency | 100 Hz |
| Model Number | ET-7024 |
Feature:
- Power over Ethernet (PoE)
- Daisy-Chain Ethernet Cabling
- LAN Bypass
- Communication Security
- Support for both Modbus TCP and Modbus UDP Protocols
- Built-in I/O
- Dual Watchdog
- Highly Reliable Under Harsh Environment
- I/O Pair Connection
- Power-on Value and Safe Value
- Led indicators for DIO status
- Reset Button
- Two pair of power input pins
Model with IO Specification:
|
Analog Output |
|||
|
Model |
AO |
||
|
Channel |
Voltage Output |
Current Output |
|
|
ET-7028 |
8 |
-0 ~ 5 V, +/- 5 V, |
0 ~ 20 mA, |
View Complete details
ET-7051 Standard Digital Module With TCP
Product Brochure
| Model Name/Number | ET-7051 |
| Dimensions | 72 mm x 123 mm x 35 mm |
| Humidity | 10 ~ 90% RH, non-condensing |
| Storage Temperature | -30 deg C - +80 deg C |
| Operating Temperature | -25 deg C - +75 deg C |
| Installation | DIN-Rail or Wall mounting |
| Consumption | 2.2 W |
| Ethernet Port | 10/100 Base-TX with Auto MDI/MDI-X |
Feature:
- Power over Ethernet (PoE)
- Daisy-Chain Ethernet Cabling
- LAN Bypass
- Communication Security
- Support for both Modbus TCP and Modbus UDP Protocols
- Built-in I/O
- Dual Watchdog
- Highly Reliable Under Harsh Environment
- I/O Pair Connection
- Power-on Value and Safe Value
- Led indicators for DIO status
- Reset Button
- Two pair of power input pins
Model with IO Specification:
|
Digital I/O |
||||||
|
Model |
DI |
DO |
||||
|
Channel |
Type |
Sink/Source |
Channel |
Type |
Sink/Source |
|
|
ET-7042 |
- |
- |
- |
16 |
Open Collector |
Sink |
|
ET-7051 |
16 |
Wet |
Sink, Source |
- |
- |
- |
|
ET-7052 |
8 |
Wet |
Sink, Source |
8 |
Open Collector |
Source |
|
ET-7044 |
8 |
Wet |
Sink, Source |
8 |
Open Collector |
Sink |
View Complete details
TM-AD2 Module Series Analog Converter
Product Brochure
| Installation | DIN-Rail Mounting |
| Dimensions | 52 mm x 98 mm x 27 mm |
| Power Consumption | 0.6 W Max. |
| Baud Rate | 115200 bps |
| Span Drift | +/-25 ppm/degC |
| Input Impedance | 10 MQ |
| Overvoltage Protection | 120 VDC |
| Intra-module Isolation | 2500 VDC |
| Input Channels | 2 Single-ended |
| Model Number | tM-AD2 |
- Voltage Inputs and Current Input
- 120 VDC Overvoltage Protection
- Resolution: 14/12 bits
- Adjustable Sampling Rate
- 4 kV ESD and EFT Protection
- 3 kV Surge Protection
- Dual Watchdog
- 2500 VDC Intra-module Isolation
- Cost-effective
- Wide Operating Temperature Range: -25 ~ +75°C
Model No with IO Specification:
| tM Series Analog I/O Module | ||||
| Model | AI | |||
| Channel | Voltage & Current Input | Sensor | ||
| tM-AD2 | 2 | 0 ~ 500 mV, 0 ~ 1 V, 0 ~ 2.5 V, 0 ~ 5 V, 0 ~ 10 V, 0 ~ 20 mA, 4 ~ 20 mA |
- | |
| tM-AD5 | 5 | +/- 1 V, +/- 2.5 V, +/- 5 V, +/- 10 V | ||
| tM-AD5C | +/- 20 mA, 0 ~ 20 mA, 4 ~ 20 mA | |||
| tM-AD8 | 8 | 0 ~ 500 mV, 0 ~ 1 V, 0 ~ 2.5 V, 0 ~ 5 V, 0 ~ 10 V | ||
| tM-AD8C | 0 ~ 20 mA, 4 ~ 20 mA | |||
| tM-TH8 | - | Thermistor | ||
View Complete details
M-7051D Standard Digital Module With RS485
Product Brochure
| Model Name/Number | M-7051D |
| Interface | RS-485 |
| Baud Rate | 115200 bps |
| Humidity | 10-95% RH |
| Storage Temperature | -40-+85 deg C |
| Operating Temperature | -25-+75 deg C |
| Dimension | 72 X 123 X 35 mm |
| Installation | DIn Rail or Wall Mounting |
Feature:
- RS-485 Industrial Multi-Drop Network
- I/O type and Range Programmable
- Easy Mounting and Connection
- Rugged Industrial Environmen
- Programmable Power-on Value and Safe Value
- Advanced DI Functions
- Overvoltage Protection
- Open Wire Detection
- Over-current Protection
- Virtual Channel to Channel Isolation
- Common Voltage Protection
- ESD Protection
- Dual Communication Protocols
Model with IO Specification:
|
Digital I/O |
||
|
Model |
DO Channel |
DI Channel |
|
M-7045D |
16 |
- |
|
M-7055D |
8 |
8 |
|
M-7051D |
- |
16 |
|
M-7052D |
- |
8 |
View Complete details
Tet-P2C2 Digital Convertor
Product Brochure
| Model Name/Number | Tet-P2C2 |
| Contact | Wet Contact |
| On Voltage Level | +10 VDC - +50 VDC |
| Off Voltage Level | +4 VDC (Max.) |
| Input Impedance | 10 kQ |
| Counters | 32 bits |
| Min. Pulse Width | 0.15 ms |
| Frequency Measurement | 3.5 kHz (without filter) |
| Isolation | 3750 Vrms |
Feature:
- Cost-effective Ethernet I/O modules (Modbus TCP/UDP slave)
- Contains a 32-bit MCU that efficiently handles network traffic
- 10/100 Base-TX Ethernet, RJ-45 x1
(Auto-negotiating, Auto MDI/MDIX, LED Indicator) - Includes redundant power inputs: PoE (IEEE 802.3af, Class 1) and DC input
- Supports TCP, UDP, HTTP, DHCP, BOOTP and TFTP protocols
- Supports UDP responder for device discovery
- Supports web configuration and firmware update via Ethernet
- Isolated digital input and output
- Supports latched DI and 32-bit high-speed counter functions
- Supports I/O pair-connection through the Ethernet
- Dual-watchdog with power-on and safe value
- Tiny form-factor with easy DIN-Rail mounting
- RoHS compliant, no Halogen
- Low power consumption (about 1.7 W only)
View Complete details
ET-7026 Standard Multifunction Module with TCP
Product Brochure
| Model Name/Number | ET-7026 |
| Accuracy | +/- 0.1% of FSR |
| Installation | DIN-Rail or Wall mounting |
| Dimensions | 72 mm x 123 mm x 35 mm |
| Max Load Current | 700 mA/Channel |
| Current Load Resistance | 500 Ohms |
| Resolution | 12 bit |
| Open Wire for Current Output | 20 mA |
| Output Channels | 2 |
Feature:
- Power over Ethernet (PoE)
- Daisy-Chain Ethernet Cabling
- LAN Bypass
- Communication Security
- Support for both Modbus TCP and Modbus UDP Protocols
- Built-in I/O
- Dual Watchdog
- Highly Reliable Under Harsh Environment
- I/O Pair Connection
- Power-on Value and Safe Value
- Led indicators for DIO status
- Reset Button
- Two pair of power input pins
Model with IO Specification:
|
Multifunction I/O |
|||||||
|
Model |
AI |
AO |
DI/Counter |
DO |
|||
|
Channel |
Voltage & |
Channel |
Voltage & |
Channel |
Channel |
||
|
ET-7026 |
6 |
+/- 500 mV, +/- 1 V, |
2 |
0 ~ 5 V,+/- 5 V, 0 ~ 10 V,+/- 10 V, |
2 |
2 |
|
|
ET-7016 |
2 |
+/- 15 mV, +/- 50 mV, |
1 |
0 ~ 10 V |
2 |
2 |
|
|
ET-7002 |
3 |
+/- 150 mV, +/- 500 mV,+/- 1V, +/- 5 V, +/- 10 V, +0 ~ +20 mA,+/- 20 mA, 4 ~ 20mA |
- |
- |
6 |
3 |
|
View Complete details
TM-P4C4 Tiny Module Series Digital Converter
Product Brochure
| Model Name/Number | tM-P4C4 |
| Dimensions | 52 mm x 98 mm x 27 mm |
| Interface | RS-485 |
| Consumption | 0.5 W |
| Max. Load Current | 700 mA |
| Load Voltage | 50 VDC |
| Output Channels | 4 Channels |
| Off Voltage Level | +1 V Max |
| Operating Temperature | -25 - +75 Deg C |
| Storage Temperature | -30 - +75 Deg C |
- Sink-type Digital Outputs
- Source-type Digital Inputs
- Photocouple Isolation
- All Channels Can Be Used As 16-bit Counters
- Dual Watchdog
- Configurable Power-on Value Settings
- Configurable Safe Value Settings
- Cost-effective
- Wide Operating
- Temperature Range: -25 °C ~ +75 °C
Model with IO Specification:
| Digital I/O | |||||||
| Model | DI | DO | |||||
| Channel | Type | Sink/Source | Channel | Type | Sink/Source | ||
| tM-P4A4 | 4 | Wet | Sink | 4 | Open Collector | Source | |
| tM-P4C4 | Source | Sink | |||||
| tM-C8 | - | - | - | 8 | Sink | ||
| tM-P8 | 8 | Wet | Sink/Source | - | - | - | |
| tM-PDW8 | 8 | Wet+Dry | Sink/Source | - | - | ||
View Complete details
Modbus I/O Data Acquisition Module Series
Product Brochure
| CPU | 32-bit ATMEL ARM, 72MHZ |
| Working Environment | 40 Deg -85 Deg C |
| Protection | IP20 |
| Watchdog | 1.5 m guard |
| Port type | 1RS485 & 1RS232 |
| Precision | 0.1%16 bit |
| Refresh rate | 0.01m |
CWT Modbus IO module series with multi-channel DI/DO/AI/PT100 input. widely used in buildings, HVAC, fire, water, petrochemical, environmental protection and other industries, for most systems integrators and automation companies, it is a highly cost-effective, reliable data acquisition module. This module is designed for the whole industry, power supply, signal inputs and outputs, RS232 and RS485 interface (option Ethernet), interference protection designed to ensure data accuracy and reliability. RS485 communication interface performs MODBUS RTU protocol, can be directly connected with the various types of PLC, DCS system, operator panel and a variety of configuration software.
System parameters:
CPU | 32-bit ATMEL ARM, 72MHZ |
OS | GCOS???10ms scheduling mechanism |
Power | 7-35VDC @2W, power supply reverse protection, isolation design |
Installation | DIN rail mounting or screw fixing |
Working Environment | -40??????85??????5%???95%RH (non-condensing) |
Protection | IP20 |
Watchdog | 1.5m guard |
Input type | 4~20mA option: 0~20mA/0~5/1~5/0~10V |
Precision | 0.1 16 bit |
Refresh rate | 0.01m |
ON signal level | 5-30VDC 6mA@24VDC |
OFF signal level | 0-3VDC |
Protection | optocoupler isolation, 2500V lightning protection, overvoltage, overcurrent protection |
sample rate | 0.01m |
Output type | normal open relay or Transistor output |
Isolation | optocoupler isolation& relay isolation |
Resistive load | 5A/250VAC 5A/30VDC |
Response time | ≤0.01s |
Precision | 0.1 |
Measure range | -200 to 320 |
View Complete details
M-7026 Standard Multifunction Module with RS485
Product Brochure
| Model Name/Number | M-7026 |
| Storage Temperature | -40 to +85 Degree C |
| Interface | RS-485 |
| Baud Rate | 115200 bps |
| Protocol | Modbus RTU,DCON |
| Humidity | 10 to 95% RH,Non-condensing |
| Operating Temperature | -25 to +75 DegreeC |
| Installation | DIN-Rail or Wall Mounting |
| Dimensions | 123 mm x 72 mm x 35 mm |
- Multifunction (6 AI, 2 AO, 3 DI and 3 DO)
- Supports Fast Mode and Normal Mode
- Individual Channel Configuration
- Open Wire Detection for Current Output
- Overload and Short Circuit Protection for Digital Output
- Configurable Power-on Value Settings
- Configurable Safe Value Settings
- 240 Vrms Overvoltage Protection for Voltage Input
- Jumper Selectable Voltage or Current Input/Output
- Dual Watchdog
- ±4 kV Contact ESD Protection
- Wide Operating Temperature Range: -25 ~ +75°C
Model with IO Specification:
Multifunction I/O | ||||||||
Model | AI | AO | DO | DI/Counter | ||||
CH | V&I- I/P | Ch | V/I -O/P | Ch | Type | Ch | Type | |
M-7002 | 4 | ±150 mV, ±500 mV, ±1 V,±5 V, ±10 V, ±20 mA, | - | - | 4 | Power Relay | 5 | Wet |
M-7026 |
6 |
2 | 0 ~ +5 V, |
3 | Open Collector |
3 |
Dry | |
View Complete details
EXPLORE MORE CATEGORIES