Nimbus Technologies

Other Detail:

• Wise (Web Inside, Smart Engine) Is A Product Series Developed By Icp Das That Functions As Control Units For Use In Remote Logic Control And Monitoring In Various Industrial Applications.
• Wise Offers A User-friendly And Intuitive Web Site Interface That Allows Users To Implement If-then-else Control Logic On Controllers Just A Few Clicks Away; No Programming Is Required.
• With Its Powerful And Easy-to-use Features, It Will Minimize The Learning Curve, Shorten Time To Market And Dramatically Reduce The Labor And Cost Spent On System Development.
• Wise-5801 Supports An I/O Expansion Bus To Implement Various I/O Functions Such As D/I, D/O, A/D And D/A According To The Xw-board. In Addition, Wise-5801 Also Support Icp Das
• I-7000/M-7000 Remote I/O Modules And Modbus Rtu Slave Devices. Based On The Variety I/O Module Of I-7000/M-7000 And The Connection Ability With Modbus Rtu Slave Devices, Wise5801 Can Provide User More Flexibility In Application Field.
• Wise-5801 Supports Modbus Tcp/Rtu Protocol To Make Seamless Integration With Scada Software Available. It Include All Advantages Which Wise Series Controllers Can Provide. In
• Addition, Wise-5801 Provide Data Logger Function With Microsd Card, It Can Record I/O Channel Value By Event Trigger Or Regular Time Period. The Data Files Can Be Sent Back By Email Or
• Ftp. Wise-5801 Also Features Sms Sending Function For Alarm Report And Sms Command Receiving Function. All Setting Can Be Completed Through Browser. 

Feature:

• Built-in Web Server for IF-Then-Else rule setting
• Built-in IF-Then-Else rule engine for logic operation 
•  No more programming. Click and get done!
• Support I/O, Counter, Timer, Email, Recipe operations
• Data logger and data files send back function supported
• Modbus TCP/RTU Protocol for SCADA Software Seamless     Integration
• Support XW-Board
• Support I-7000 Remote I/O Modules(Up to 16) 
• Support Modbus RTU Slave Devices(Up to 10) 
• SNTP Time Synchronization Supported 
•  Support SMS (GSM: Quad-band 850/900/1800/1900 MHz)         

WISE-580x I/O modules support specification: 

 

 

Features:

• Built-in Web Server for IF-Then-Else rule setting
• Built-in IF-Then-Else rule enigne for logic operation
• No more programming. Just click and get done!
• Support IO, Counter, Timer, Email operations
• Modbus/TCP Protocol for SCADA Software Seamless Integration
• IEEE 802.3af-compliant Power over Ethernet (PoE)
• 10/100 Base-TX Ethernet
• I/O expansion bus
• Support DI/DO X-Boards: X107, X109, X110, X111
• Support Multi-Function X-Boards: X202, X203, X303, X304, X305, X308, X310, X324

WISE (Web Inside, Smart Engine) is a product series developed by ICP DAS that functions as control units for use in remote logic control and monitoring in various industrial applications. WISE offers a user-friendly and intuitive web site interface that allows users to implement IF-THEN-ELSE control logic on controllers just a few clicks away; no programming is required. With the built-in IF-THEN-ELSE logic engine, WISE can execute the automation logic in a stable and efficient way, and it also provides mathematic operation, Schedule and Email alarm message sending functions.

Features:

• IF-THEN-ELSE logic rules execution ability
•  No programming is required to implement logic content on controllers
•  No extra software tool is required; all operations can be done through the Web browsers
• Support XV-Board and various remote I/O Modules
• Provide Timer and Schedule operation
• Provide Email Alarm message sending function
• Provide CGI Command Sending and Receiving functions
• Data Logger function
• Math formula editing function
• Real-time monitoring system status of controllers
• Password protection for access control 
• Active I/O Sending function
•  MQTT Message Publish/Subscribe operation
• Connection with IoT Cloud Platform
• Mobile network connection
• Provides SMS command receiving function and alarm notification function
• Connection with IP Camera
• Provide LINE Notify message sending function   

Hardware Specifications:

Other Detail:

• Wise (Web Inside, Smart Engine) Is A Product Series Developed By Icp Das That Functions As Control Units For Use In Remote Logic Control And Monitoring In Various Industrial Applications.
• Wise Offers A User-friendly And Intuitive Web Site Interface That Allows Users To Implement If-then-else Control Logic On Controllers Just A Few Clicks Away; No Programming Is Required.
• With Its Powerful And Easy-to-use Features, It Will Minimize The Learning Curve, Shorten Time To Market And Dramatically Reduce The Labor And Cost Spent On System Development.
• Wise-7105 Follows Ieee 802.3Af-compliant (Classification, Class 1) Power Over Ethernet (Poe) Specification. It Allows Receiving Power From Poe Enabled Network By Ethernet Pairs (Category
• 5 Ethernet Cable). This Feature Provides Greater Flexibility And Higher Efficiency Therefore Simplifying Systems Design, Saving Space, Reducing Cables And Eliminating The Requirement For
• Dedicated Electrical Outlets. Meanwhile, In Case Under A Non-poe Environment, Wise-7105 Will Still Be Able To Receive Power From Auxiliary Power Sources Like Ac Adapters Or Battery, Etc.
• This Multi-function Module Wise-7105 Supports Modbus/Tcp Protocol To Make Seamless Integration With Scada Software Available. It Features 16-bit, 8-channel Thermistor Inputs And
• 4-channel Digital Outputs. Each Analog Channel Is Allowed To Configure An Individual Range. 

Features:

• Built-in Web Server for IF-Then-Else rule setting
• Built-in IF-Then-Else rule engine for logic operation
• No more programming. Just click and get done!
• Support IO, Counter, Timer, Email operations
• Modbus/TCP Protocol for SCADA Software Seamless Integration
• IEEE 802.3af-compliant Power over Ethernet (PoE)
• 10/100 Base-TX Ethernet
• Support Thermistor Input
• Individual Channel Configuration
• 4-channel Digital Outputs
• 2-way Isolation/ESD Protectio

Specification: 

Wise (Web Inside, Smart Engine) Is A Product Series Developed By Icp Das That Functions As Control Units For Use In Remote Logic Control And Monitoring In Various Industrial Applications.Wise Offers A User-friendly And Intuitive Web Site Interface That Allows Users To Implement If-then-else Control Logic On Controllers Just A Few Clicks Away; No Programming Is Required.With Its Powerful And Easy-to-use Features, It Will Minimize The Learning Curve, Shorten Time To Market And Dramatically Reduce The Labor And Cost Spent On System Development.Wise-7102 Follows Ieee 802.3Af-compliant (Classification, Class 1) Power Over Ethernet (Poe) Specification. It Allows Receiving Power From Poe Enabled Network By Ethernet Pairs (Category5 Ethernet Cable). This Feature Provides Greater Flexibility And Higher Efficiency Therefore Simplifying Systems Design, Saving Space, Reducing Cables And Eliminating The Requirement ForDedicated Electrical Outlets. Meanwhile, In Case Under A Non-poe Environment, Wise-7102 Will Still Be Able To Receive Power From Auxiliary Power Sources Like Ac Adapters Or Battery, Etc.This Multi-function Module Wise-7102 Supports Modbus/Tcp Protocol To Make Seamless Integration With Scada Software Available. It Features 3-channel Analog Inputs, 6-channel DigitalInputs And 3-channel Power Relay Outputs. Each Analog Input Channel Provides 240 Vrms High Over Voltage Protection.
Features:

• Built-in Web Server for IF-THEN-ELSE rule setting
• Built-in IF-THEN-ELSE rule engine for logic operation
• No more programming. Just click and get done!
• Support IO, Counter, Timer, Email operations
• Modbus/TCP Protocol for SCADA Software Seamless Integration
• IEEE 802.3af-compliant Power over Ethernet (PoE)
• 10/100 Base-TX Ethernet
• AI: 3 (mV, V, mA)
• DO: 3 (Power Relay, Form A)
• DI: 6 (Wet Contact)

Specification: 

Features:

• Built-in Web Server for IF-Then-else rule setting
• Built-in IF-Then-else rule engine for logic operation
• No more programming. Just click and get done!
• Support IO, Counter, Timer, Email operations
• Modbus/TCP Protocol for SCADA Software Seamless Integration
• IEEE 802.3af-compliant Power over Ethernet (PoE)
• 10/100 Base-TX Ethernet
• 2-way Isolation/ESD Protection
• DO Type: 8 Isolated Open Collectors (Sink Type)
• DI Type: 8 Isolation Wet Contact (Sink/Source)

Specification: 

Introduction:

• WISE IIoT Edge Controller is an Intelligent Web-based Multi-functions PAC controller designed by ICP DAS that functions as control units for use in remote logic control and monitoring in various industrial applications. WISE offers a user-friendly and intuitive HMI interface that allows you to implement control logic on controllers just a few clicks away; no programming is required. With this powerful and easy-to-use software, it will minimize the learning curve, shorten time to market and dramatically reduce the labor and cost spent on system development.
• Through Web browser, you can access Web Server on WISE to perform tasks such as logic rule edition and download. WISE equips an IF-THEN-ELSE rule engine that will check whether the rules are valid or not and determine the execution of actions under specific conditions, for examples: setting up I/O channel values, perform scheduled and Timer tasks, sending Email under a specific condition. 
• WISE provides more supports in I/O functions in addition to merits inherited from WISE series controllers. It supports XV-board; allows connections to I-7000 I/O modules, Modbus RTU Slave modules and Modbus TCP Slave modules together. The wide range of selection options enables the ???exibility in I/O module integration to meet the requirements from various applications. WISE provides Data Logger function to record the I/O channel data by periodic cycle or event trigger. And it allows to send the data files by FTP or Email to the control center. In addition to the CGI command sending function, WISE supports the CGI command receiving function that allows the network devices to trigger the operation of IF-THEN-ELSE logic rule of WISE by Ethernet. The well thought-out CGI command functions make WISE being able to interact with the devices  exibility in the network environment. 
• In addition, through the Modbus TCP/RTU protocol to enable SCADA software to control and monitor I/O channel or system status on controllers in real time. WISE supports SNMP V2c protocol and the SNMP Trap operation to work with the SNMP Network Management software. It also supports the MQTT protocol to connect with the MQTT broker for the message publishing and subscribing mechanism, and the connection with the IoT service which Microsoft Azure and IBM Bluemix provide. Additionally, WISE provides to send messages to the instant messaging APP as LINE. The  exible integration ability with the SCADA and IT software (or devices) and the reliable ability of real-time I/O logic control make WISE the most cost-effective I/O controller in the IoT (Internet of Thing) Age.

Features:

• IF-THEN-ELSE logic rules execution ability.
• No programming is required to implement logic content on controllers
• No extra software tool is required; all operations can be done through the Web browsers
• Support XV-Board and various remote I/O Modules
• Provide Timer and Schedule operation
• Provide SSL Email Alarm message sending function
• Provide CGI Command Sending and Receiving functions
• Data Logger function
• Math formula editing function
• Real-time monitoring system status of controllers
• Password protection for access control
• Active I/O Sending function 

Please note: The SCADA software (or HMI device) must equip the Modbus TCP Slave function to receive the I/O channels data sent by WISE-523x/WISE-224x.

• MQTT Message Publish/Subscribe operation
• Connection with IoT Cloud Platform
• Mobile network connection
• Provides SMS command receiving function and alarm notification function
• Connection with IP Camera
• Provide LINE Notify message sending function